Lab Emergency Eye and Face Wash Station Opti-Klens II w/Eliminator Valve

Desert Assembly Opti-Klens II Lab Emergency Eye and Face Wash Station with Eliminator Valve

Designed to fit laboratory gooseneck faucets as a permanent face wash & eyewash fountain with unlimited water supply in an emergency.

In operation, unit mounts to the spout with two spray nozzles curving upwards with a 15 degree greater angle then the standard OK-II model.

In an emergency, it frees both hands to hold eyes open to the flow of water.

The addition of the Eliminator Valve allows water temperature to be pre-set at the faucet and remain on. You now have a dedicated face wash & eyewash station with only cold water available. For sink use, the water flow is activated by the use of the push through plunger on the Eliminator Valve. Push the plunger to the opposite side for water flow.

• Chrome-plated
• Solid brass face & eyewash unit
• Meets ANSI Standard #Z358.1-1998 for an eyewash unit
• No plumbing required
• Delivering more than 3 gallons of water per minute, it does so at a reasonable height
• Two of the most common adapters are packed with the unit. Other adapters are available from manufacturer
• Manufacturer's Product ID: 429622
• Manufacturer: Desert Assembly